View examples

Tip

This is how your Live View should look like // Cameras captures full Board from all angles

Example Image proper way

Tip

Problem: One of the cameras is rotated by 180 degrees // Solution: Unscrew the camera from its holder and rotate it by 180 degrees

Example Image rotate 180

Tip

Problem: One of the cameras is rotated by 90 degrees // Solution: Unscrew the camera from its holder and rotate it by 90 degrees

Example Image rotate 90

Tip

Problem:The image frame is too small // Solution: If you’re using ready-made 3D printed holders, check the field of view (FOV) of your cameras and make sure it’s around 100°. If you’re using a self-made holder, increase the distance of the cameras from the board

Example Image too close

Tip

Problem: The Images are too dark // Solution: Change the settings of your Cameras and increase the Brightness

Example Image too dark

Tip

Problem: The Images are too bright // Solution: Change the settings of your Cameras and decrease the Brightness

Example Image too bright